| | | |
|
Four Roller Plate Bending Machine (Haeusler - VRM-HY 3100/35)
| Rollers |
: 4 Nos. |
| Maximum Plate Width |
: 3100mm |
| Upper Roll Dia / Rolling Capacity |
: 570 mm / 35mm x 3000mm - 1000dia min |
| Lower Roll Dia / Rolling Capacity |
: 570 mm / 50mm x 1200mm - 1800dia min |
| Side Roll Dia / Rolling Capacity |
: 460 mm |
| Changeable / Special Equipment |
: 440 mm / Cone Rolling |
|
 |
Four Roller Plate Bending Machine (Haeusler - VRM-HY 3000/08)
| Rollers |
: 4 Nos. |
| Maximum Plate Width |
: 3000mm |
| Upper Roll Dia / Rolling Capacity |
: 320 mm / 08mm x 3000mm - 500 dia. min |
| Lower Roll Dia / Rolling Capacity |
: 320 mm / 10mm x 1200mm - 800 dia. min |
| Side Roll Dia / Rolling Capacity |
: 250 mm / 16mm x 1000mm - 2000dia. min |
| Changeable / Special Equipment |
: 240 mm / Cone Rolling |
|
|
|
|
Plate Shear - Welnbrenner / TSV 10 - 3050
| Maximum Plate Thickness |
: 10mm |
| Maximum Plate Width |
: 3000mm |
| Special Equipment |
: Plate Separator |
|
|
Coordinate Drilling And Milling Machine (KOLB/KBN G 60)
| Table Way X-Axis |
: 2500mm |
| Drilling Spindle Way Y-Axis |
: 2000mm |
| Drilling Spindle Stroke Z-Axis |
: 500mm |
|
|
|
|
Dished Press With Manipulator And Dishing Roller
| Max Plate Thickness (Dished Ends) |
: 16mm 5/8” |
| Min Plate Dia. (Dished Ends) |
: 1250mm 49” |
| Max Dia. (Torisherical Dish) |
: 3500mm 138” |
| Max Dia. (Semi–Ellipsoidal Dish) |
: 3000mm 118 |
|
|
Schleifenbaum & Steinmetz - VMB 4122 And KOLB 4022-500
| Table Size |
: 1200 x 1200mm |
| Max Dia. of Flat Round Sheet |
: 4100mm 162” |
| Min Dia. of Flat Round Sheet |
: 1800mm 71” |
| Max Plate Thinkness of Round Sheet |
: 22mm 7/8” |
| Max Weight of Round Sheet |
: 2300kgs 5100Lbs |
| Max Operating Pressure (Manipulator) |
: 140atu 2000psi |
| Max Operating Pressure (Press) |
: 400atu 5700psi |
|
|
|
|
Vertical Boring Machine - FRORIEP 10 KZ 200
| Maximum Plate Dia |
: 2000mm |
| Maximum Weight |
: 2000Kgs |
| Maximum Height |
: 1200mm |
|
|
Sliding Head Drilling Machine (SCEPEL - RFH 100/3000)
| Max Distance From Columns |
: 3000mm |
| Min Distance From Columns |
: 540mm |
| Max Height Adjustment |
: 1260mm |
| Minumum Spindle Stroke |
: 400mm |
| Spindle Dia. |
: 65mm |
| Mores Cone |
: MT 6 |
| Max Drill Dia. |
: 100mm - 170mm |
| Fixing Plate Size |
: 3160 x 1550mm |
|
|
|
|
Tehag Submerged Arc Welding Machines
| Amperege |
: 800 amps |
| Voltage |
: 380 Volts |
| Vertical Travel |
: 3650mm |
| Horizontal Travel |
: 3650mm |
| Wire Size |
: 1mm - 3.2mm |
|
|
Ransome Submerged Arc Welding Machine
| Amperege |
: 1250 amps |
| Voltage |
: 460 Volts |
| Vertical Travel |
: 3650mm |
| Horizontal Travel |
: 3650mm |
| Wire Size |
: 1mm - 3.2mm |
|
|
|
|
CNC-Oxygen and Plasma Cutting Machine
| Software |
: OMNIWIN Software |
| Max Cutting Thickness (Oxygen) |
: 45mm |
| Max Cutting Thickness (Plasma) |
: 250mm |
| Max Plate Width |
: 3000mm |
| Table Length |
: 15000mm |
|
|
Gas Fired Roller Cover - Top Hat Furnace (Schoeller Bleckmann)
| Clear Internal Size |
: 12m Long x 3m Wide x 3m Height |
| Max Operating Temperature |
: 700 Deg Celcius |
| Fuel |
: Liquid Petroleum Gas |
| Furners |
: 4 – Nu-way MP 15 |
| Maximum Load |
: 35 Tons |
| Temperature Control |
: FGH P |
| Temperature Recording |
: Sekonic SA-190P |
|
|
|
|
Three Roller Double Pinch Bending Machine (FACCIN-HAV/S3180)
| No. of Rollers |
: 3 Nos |
| Top Roll Dia |
: 800mm |
| Side Roll Dia |
: 700mm |
| Max Plate Width |
: 3050mm |
| Max Bending Thickness |
: 130mm - 500 dia. min. |
| Max Pre-Bending Thickness |
: 80mm |
| Roll Radius |
: 2000mm |
|
