MIS Arabia

MIS Arabia has set-up a new module yard within Jubail Industrial Port for MED/MSF Evaporators and fabrication of other structural and piping works, including offshore/onshore drilling.
MIS Arabia secured large and heavy Columns for Jubail Export Refinery Project, which includes Xylene Re-run with 9m diameter x 95m long and 1500 Tons weight.
MIS Arabia completed 3 nos. high thick Gas Slug Catchers (103+3mm, CS+Inconel 625 clad) and 1 no. Deaerator Tower for Karan Gas Field.
MIS Arabia completed 2 large and heavy Columns (Qunech Tower & Gasoline Fractionator) with 10m diameter x 50m long for NCP Project, Jubail, KSA before the contractual delivery date.
Subsea Valve Skids (15 nos.) successfully completed for Saudi Aramco offshore fields
MIS Arabia installed new bogie hearth post weld heat treatment furnace (8m W x 9m H x 24m L)

Capabilities

Three Roller Double Pinch Bending Machine (FACCIN-HAV/S3180)

No. of Rollers	: 3 Nos
Top Roll Dia	: 800mm
Side Roll Dia	: 700mm
Max Plate Width	: 3050mm
Max Bending Thickness	: 130mm - 500 dia. min.
Max Pre-Bending Thickness	: 80mm
Roll Radius	: 2000mm

Four Roller Plate Bending Machine (Haeusler - VRM-HY 3100/35)

Rollers	: 4 Nos.
Maximum Plate Width	: 3100mm
Upper Roll Dia / Rolling Capacity	: 570 mm / 35mm x 3000mm - 1000dia min
Lower Roll Dia / Rolling Capacity	: 570 mm / 50mm x 1200mm - 1800dia min
Side Roll Dia / Rolling Capacity	: 460 mm
Changeable / Special Equipment	: 440 mm / Cone Rolling

Four Roller Plate Bending Machine (Haeusler - VRM-HY 3000/08)

Rollers	: 4 Nos.
Maximum Plate Width	: 3000mm
Upper Roll Dia / Rolling Capacity	: 320 mm / 08mm x 3000mm - 500 dia. min
Lower Roll Dia / Rolling Capacity	: 320 mm / 10mm x 1200mm - 800 dia. min
Side Roll Dia / Rolling Capacity	: 250 mm / 16mm x 1000mm - 2000dia. min
Changeable / Special Equipment	: 240 mm / Cone Rolling

Plate Shear - Welnbrenner / TSV 10 - 3050

Maximum Plate Thickness	: 10mm
Maximum Plate Width	: 3000mm
Special Equipment	: Plate Separator

Coordinate Drilling And Milling Machine (KOLB/KBN G 60)

Table Way X-Axis	: 2500mm
Drilling Spindle Way Y-Axis	: 2000mm
Drilling Spindle Stroke Z-Axis	: 500mm

Dished Press With Manipulator And Dishing Roller

Max Plate Thickness (Dished Ends)	: 16mm 5/8”
Min Plate Dia. (Dished Ends)	: 1250mm 49”
Max Dia. (Torisherical Dish)	: 3500mm 138”
Max Dia. (Semi–Ellipsoidal Dish)	: 3000mm 118

Schleifenbaum & Steinmetz - VMB 4122 And KOLB 4022-500

Table Size	: 1200 x 1200mm
Max Dia. of Flat Round Sheet	: 4100mm 162”
Min Dia. of Flat Round Sheet	: 1800mm 71”
Max Plate Thinkness of Round Sheet	: 22mm 7/8”
Max Weight of Round Sheet	: 2300kgs 5100Lbs
Max Operating Pressure (Manipulator)	: 140atu 2000psi
Max Operating Pressure (Press)	: 400atu 5700psi

Vertical Boring Machine - FRORIEP 10 KZ 200

Maximum Plate Dia	: 2000mm
Maximum Weight	: 2000Kgs
Maximum Height	: 1200mm

Sliding Head Drilling Machine (SCEPEL - RFH 100/3000)

Max Distance From Columns	: 3000mm
Min Distance From Columns	: 540mm
Max Height Adjustment	: 1260mm
Minumum Spindle Stroke	: 400mm
Spindle Dia.	: 65mm
Mores Cone	: MT 6
Max Drill Dia.	: 100mm - 170mm
Fixing Plate Size	: 3160 x 1550mm

Tehag Submerged Arc Welding Machines

Amperege	: 800 amps
Voltage	: 380 Volts
Vertical Travel	: 3650mm
Horizontal Travel	: 3650mm
Wire Size	: 1mm - 3.2mm

Ransome Submerged Arc Welding Machine

Amperege	: 1250 amps
Voltage	: 460 Volts
Vertical Travel	: 3650mm
Horizontal Travel	: 3650mm
Wire Size	: 1mm - 3.2mm

CNC-Oxygen and Plasma Cutting Machine

Software	: OMNIWIN Software
Max Cutting Thickness (Oxygen)	: 45mm
Max Cutting Thickness (Plasma)	: 250mm
Max Plate Width	: 3000mm
Table Length	: 15000mm

Gas Fired Roller Cover - Top Hat Furnace (Schoeller Bleckmann)

Clear Internal Size	: 12m Long x 3m Wide x 3m Height
Max Operating Temperature	: 700 Deg Celcius
Fuel	: Liquid Petroleum Gas
Furners	: 4 – Nu-way MP 15
Maximum Load	: 35 Tons
Temperature Control	: FGH P
Temperature Recording	: Sekonic SA-190P